Short Bytes: In this article, I am going to tell you about various methods which will help you to repair your corrupted SD card or Pen drive. Very often we face this problem of a corrupted storage device, and using few CMD commands you can perform the fix. If command prompt isn’t your thing, you can also attempt USB drive repair using Windows Explorer.
Dealing with a corrupted SD card or pen drive is a tedious task. We spend hours to get back our storage into working condition but get nothing.
You might have seen online forums full of questions like “My pen drive is corrupted” or “My SD card is not working.” This article comprises of various methods which will help you repair your corrupted pen drive or SD card. For SD card, you will have to insert it into the slot provided in your computer or by using an external card reader. Use an adapter, if you have a microSD card.
It will not work if you connect some device having the SD card like a smartphone or a camera. For attempting pen drive repair, you don’t need any such accessory. Check out these different methods.
Different methods to repair corrupted pen drive or SD card: Change the drive letter Sometimes your computer is unable to assign drive letters (like C, D, E) to your storage media. Due to this reason, the files on it can’t be accessed. To resolve this issue, you can assign the drive letter to your device. Here are the simple steps to fix the corrupted pen drive or memory card by assigning a correct drive letter:. Connect your storage media to your computer. Right-click on My Computer/This PC.
Click Manage in the drop-down menu. Click Disk Management on the left side and wait for a few seconds so that Windows can load the Virtual disk service. Right-click on your storage media and click Change Drive Letter and Paths. Click the drive letter (it will turn blue) and click Change. Select the drive letter from the drop-down list.
Try to use it on another PC Maybe the issue is specifically on your PC, and that’s why you are finding trouble in running the USB flash drive. Try connecting your SD card or pen drive to another computer. Hopefully, it may work, and you’ll be able to backup your data from it. Try another USB port Although, it sound’s strange, but you’re wasting your time if you repeatedly try to connect your SD card or flash drive to a single USB port on your computer.
It could be possible that the port itself is damaged or some software issue is to be blamed. So, try other USB ports if your USB drive or SD card is not getting recognized. Reinstall the drivers There are times when the drivers that run your pen drive get corrupted and your PC will not be able to detect the storage media. You can reinstall drivers by following these simple steps:. Right click My Computer/ This PC. Click Manage.
Click Device Manager on the left side. Double-Click Disk Drives in the list. Right-click on the name of your pen drive. Click Uninstall. Disconnect your storage media and restart your PC. Connect your pen drive again. Your PC will detect it.
Also Read: Repair corrupted SD card or Pen Drive using Windows Explorer This is the most commonly used procedure to repair a connected storage media to your computer. Open My Computer or This PC. Select the corrupted drive and Right-click.
Click Format in the drop-down menu. Click Restore Device Defaults in the popup window.
Click Start to begin the format process. You can uncheck the Quick format option if you want the computer to deep scan the drive/card for errors but this will take time. So, uncheck it only if you fail in the first attempt.
Click Ok in the next dialog box which will warn you that the data will be lost. The format process will complete in a few moments, and you will have your error-free SD card or pen drive. Repair corrupted Pen Drive or SD card using CMD This process involves Windows command prompt which is commonly known as CMD.
In this, you have to enter some CMD commands, and Windows will forcefully format your corrupted pen drive/SD card. Connect the corrupted pen drive or SD card to your computer. Hover your mouse over the Start button and Right-click.
Click Command Prompt (Admin). A CMD window will open. Type diskpart and press Enter. Type list disk and press Enter. A list of all the storage devices connected to your computer will be displayed. Type select disk and press Enter.
(Example: select disk 1). Important: Make sure you enter the number correctly. Otherwise, you may format your internal hard drive.
You can type list disk again to check whether you are going correctly. There will be a star (asterisk symbol) before the name of the selected disk.
Type clean and press Enter. Type create partition primary and hit Enter. Type active. Type select partition 1. Type format fs=fat32 and press Enter.
The format process will finish in a few minutes. You can write NTFS instead of fat32 if you want to carry files larger than 4 gigabytes. Don’t close the CMD until the work is finished. SD card and USB drive repair by removing bad sectors Our storage devices store data in different sectors. Due to various reasons, these sectors become unusable, giving rise to bad sectors. By using some steps and running simple commands, you can perform a USB drive repair. Read more about it.
Recover your lost data You can use Sandisk Rescue Pro to recover your data in case you have deleted your files or formatted your SD card/Pen Drive by mistake. The SD card needs to be in working condition to perform the recovery process.
Other notable data recovery software is Recuva by Piriform. For more information on data recovery, check out our list of the. Tools provided by pen drive and SD card makers You might not be aware but many storage device makers like SanDisk, Kingston, Samsung, Sony, etc. Provide their own low-level utilities for formatting and other repair purposes. Such tools can be used to fix and restore SD cards and flash drives to their full capacity.
You can find these tools by visiting the websites of the device makers or by contacting their support. In my own personal experience, such alternative SD card and USB drive repair methods have turned out to be more useful.
SD Association which publishes the SD specification also provides a tool called which can be used revive SD, SDHC, and SDXC cards. It’s available for both Windows and macOS. Other SD card related problems The solutions for repairing SD cards and flash drives might be similar, but they are a different kind of hardware. For SD cards, there could be several issues preventing you from accessing them on your computer. Issues with external card readers While most of the modern laptops and 2-in-1 devices feature an SD card slot, the same is a no-show on desktops.
That’s why people take the help of cheap external card readers which run into problems more often. External card reader not working Sometimes, it might be the case that your card reader is broken and you’re blaming your innocent PC.
Maybe, the memory card reader isn’t getting enough power from the USB port, or no power at all if its USB cable is damaged. It could also be the case that you’re using an old card reader while trying to access your card. It may not support higher capacity SDXC, newer, or may not work on the latest versions of operating systems. Check if your SD adapter is working properly When you’re trying to connect a microSD card using a MicroSD to SD adapter, make sure the adapter is working fine. Also, there is a tiny slider present on the SD card adapter, when turned on, allows the data on the card to be read-only. Check if it’s in the correct position.
Damaged SD card If you are one of the people who use their memory cards irresponsibly, there might be one day when it will get damaged permanently. Improperly installing and removing the SD card from the card reader can hurt its golden connectors and even make it unusable. So, if your card is not getting recognized, check the connectors.
A little advice There are chances that the warranty of your corrupted USB drive or SD card is still valid. So, if your storage device is giving you problems again and again, it’s advisable to invest some effort and go for a refund or replacement. I’m recommending this as it’s not worth putting your faith in a USB drive that’s showing signs of unreliability again and again.
Sandisk Usb Repair Tool Reviews
How to repair corrupted usb flash drives with usb repair tools. 1. Lash Drive Repair www.flashdrive-repair.com Download Best USB flash drive repair software.Learn how to repair a corrupted USB flash drive.Download all recovery software and flash drive repair software.
First You must extract your Flash disk information. The first step of flash drive repair is determining your USB flash drive information to know which repair software will be suitable for this flash drive. To determine Flash drive information you can use many software such as,Chip genius,flash extractor, chip easy and many flash drive software but i prefer using Chip genius software.
Now Bring your corrupted USB flash disk and Download Chip Genius from this link 'Chip Genius Software 2014 ',connect your corrupted usb stick to your computer. Open Chip Genius software and insert your USB pen drive, Once you connect the flash drive,Chip genius will detect Flash information.Now the important parameters in the Chip genius report for us is three things: 1. Chip Vendor 3.
Watch love simon full movie. Chip Part-Number. If the Chip genius detect the flash drive information correctly, You will get Chip vendor,Chip Part- Number so we can repair the USB stick by Update firmware,this means a software solution.But Sometimes Chip genius report doesn't show chip vendor,chip part number or write unknown, in this way there is a hardware solution to make the flash drive recognized by computer and chip genius then use the software 'we will discuss it after finishing the software part '. Repair Corrupted USB Pen drive by Updating Flash Firmware 'Software solution ' Now we start to repair flash drive.There are many ways to repair corrupted toHow'articlethisinbeforethemofoneexplaini,memoryflashUSB PID-'VIDitcallediway,this'stepsthreeindriveflashusbrepair repairing method '.In this way after we get the Chip genius report for our flash ru.Flashboot'sitethisthoGoandnumberPIDTheandVIDthetake,wedisk ' really i like this site, because it was my inspiring guide before, i learned a lot of things about repairing flash drives from it.
1- VID-PID Flash drive Repairing Method. Now open the link then write the VID,PID in the boxes,look to this picture. Write VID and PID that you got before from Chip Genius report, then click Search. You will got a schedule of flash drive software with this parameters, we will need to focus in four parameters only from them 'Chip Vendor,Chip Model,Size (GB),UTILS 'Flash Firmware '.
After we look to this Parameters and we found our flash drive information identical with chip genius report, Look to UTILs you will find the name of your correct flash drive repair software.Copy the Name of Flash drive repair utility then go to Our lovely Google Search engine and write the name of repair software and search about it.You will find a link to download the software from Flash Drive repair website or Flashboot.ru or any flash drive repair websites 'The goal is to repair your usb flash disk, doesn't matter who is the website '. As example we find the software download link in Flashboot.ru,look to the picture. This is an example of phison chip vendor firmware software, to download it click on PhisonMPALLV3.63PS2251-67.rar then download it directly to your computer. To repair USB flash disk, open the software then if the software is correct, you will find your flash in the software.Click in start to begin updating flash firmware. 2- Chip vendor -Chip Model Flash Drive repair Method. This is a direct USB flash Drive repair Method.In this method we will search about the repair software directly on the net.
From Chip Genius report,Copy the chip vendor,part number and paste them in Google search then enter. You will find many download links of your flash drive repair software,choose the one identical to your words and download it. Open the downloaded repair software, insert your usb flash disk to your computer.If this is the right software, you will see your flash drive information in the software interface.Click start or format to begin formatting your corrupted usb flash disk. 3- General Best Flash drive repair software There are many USB flash drive repair freeware software that maybe working and repairing your USB stick.Many Flash drive brand company develop a special software for it's flash memory.Also there is many general formatting and recovery software that can help you in fixing your flash disk. 3-1 Branded Flash drive repair Software I will put the flash drive repair software for many famous USB flash disk,I'm already explain them in special articles.
At certain times you may get “adventurous” with your USB stick and do something to it which makes it unreadable – meaning to the point where you can’t even format the thing anymore. It also could be you have a USB stick so old that it has a really difficult time initializing.
Should you toss the stick out at that point? No, there is one more thing you could try – a low-level format. Now I know – and so should you – that low-level formatting goes into danger territory when it comes to media storage. A low-level format has the same danger level as, say, flashing a BIOS. What this means is that if the process is interrupted, it can permanently ruin things. A free utility you can download right now to perform a low-level format on a USB stick is the HDD LLF Low Level Format Tool. It’s speed-capped to 50MB/s unless you pay $3.30 – however it’s completely free to use otherwise.
The way this utility works is very easy. Plug in your USB stick and launch the program. Choose the LOW-LEVEL FORMAT tab, pick the appropriate device, and format. I tested the utility on an old 512MB Sandisk Cruzer Micro I have, and this is what it looked like when running: It’s important to note that once finished the stick isn’t usable yet as you will have to high-format it. All you need to do for that open up Computer (or My Computer if using XP), locate the drive letter assigned to the stick, double-click it and Windows will ask if you want to format the device so it can be used.
I do suggest not performing a quick-format just to be on the safe side. Will this work on storage devices other than USB sticks?
Of course it will. It will work on any storage device that can be formatted (meaning not optical), however, a few notes on that:. Be ABSOLUTELY SURE which device you’re formatting before you commit to it. DO NOT use your computer while the format is taking place. If the device you’re formatting is over 4GB in size, I strongly recommend paying the measly $3.30 for the unlimited-speed version, else you’ll be waiting a long, long time for the format to complete. Things this utility will not do.
Sandisk Usb Repair Tool Repair
It will not make a slow USB stick any faster concerning file transfers. If the device is slow because it’s old, well, there’s not really anything you can do about that. It probably won’t make a USB stick any more reliable than it was. If the stick had questionable stability beforehand, performing a low-level format doesn’t necessarily guarantee that it will fix that problem.
Sometimes a USB stick that is too far gone simply can’t be repaired. It will not reassign drive letters.
Even though this is true, the utility is well-designed, so when you launch it, there’s a nice little link that can take you directly to the Windows Disk Management Console where you can change things like that. Should you always go with a low-level format when erasing a USB stick or hard drive?
Absolutely not. A low-level format is specifically for the instances where you’re trying to get a storage device that’s unusable usable again. You should only use a low-level format if the storage device will not work or has instability issues even after you’ve performed a high-level format. What if I just want to erase the MBR on a USB stick I made bootable? Again, this utility was written very smartly, because it does have that option. When you choose the LOW-LEVEL FORMAT tab, at bottom right is a checkbox specifically just for that function: Where this is useful is if you write a Linux ISO to a USB stick that stuck a boot loader on it (such as with ) and you want it gone.
The quick-wipe which removes all partitions and the MBR (Master Boot Record) is just what you would want to get rid of that stuff on a USB stick. On a final note, use this utility with caution. Remember, low-level formatting is a last option and never a first. Here’s where you can get it.
Some card readers or host devices are not compatible with the larger SDHC and SDXC cards. If the reader or host is not compatible with the larger capacity the card will be re partitioned to a size that is supported. For example if your card reader or camera is compatible with a SDHC card with a maximum capacity of 32GB using this reader or camera to format a 64GB SDXC card will result in the card being re partitioned to 32GB (27GB usable capacity) If you experience this issue you will need to use a reader or host that supports the full capacity of the card and use the SD formatter to recover the full capacity. WARNING: Formatting will erase all data on the card. Back up all your data before proceeding. Run the SD Formatter Application 2. Select the drive letter for the SDHC/SDXC card and then select format.
Transcend Usb Repair Tool
Click yes to confirm format process. Once format is complete the SD card will be properly formatted.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |